RAplus is a high-performance, mechanical bearing, horizontal arm CMM, top mounted onto an inherently stable base plate or runway. RAplus does need a foundation so the base plate or runway can be installed flush with the floor so as to make part loading easy.

The RUF under-floor measuring arm is the ideal complement to an RAD, RADplus or RAX duplex installation when difficult to access features need to be measured from below. The arm is available in manual or CNC versions. The measuring range depends on the RAD, RADplus or RAX machine that the RUF is combined with. The measuring arm points vertically upwards and can work individually or in a shared coordinate system with the arms above the floor, acting in a collision protected and synchronised manner.

RA is a good-value, mechanical bearing, horizontal arm CMM, top mounted onto an inherently stable base plate or runway. RA does need a foundation so the base plate or runway can be installed flush with the floor so as to make part loading easy.

The RS is a good-value, mechanical bearing, horizontal arm CMM, side mounted onto an inherently stable base plate. RS generally does not need a foundation so can be easily installed into an existing room.

These multi-purpose coordinate measuring machines offer maximum measurement volume for medium and especially large work-pieces.